Humcar Store Catalog
First stage regulator in two versions:
Adjustable between 20 to 30 psi for high flow rates 130 m³/h GN or 9'500.000 BTU and fixed pressure at 5 psi for 80 to 150 m³/h GN, with anti-fraud system, which prevents manipulation by third parties, avoiding losses in billing, due to unauthorized comprehensibility factors.
Compact size makes it ideal for small measurement center, saving building space.
Built-in relief valve safety system, which protects networks and equipment from accidental overpressure.
Accessory used in domestic and commercial LPG installations to connect up to 4 cylinders simultaneously. With relief valve that protects the system from overpressure. Suitable for installation with first or single stage regulators.
Hose fitting that allows the union between the central unit and the LPG storage cylinder, using a W20 X 14 LH threaded connector and a 7/8 left hand wheel.
Specially designed for use in high pressure propane gas piping installations.
high pressure propane gas piping.
- The materials of the connectors and clamps are protected against corrosion (zinc plated - iridescent), caused by humidity, chemicals and/or cooking oils.
- The handwheel is manually adjusted to the cylinder.
- Manufactured in Zinc with paint coating.
- Does not have a relief valve, this safety fitting must be added at assembly or must always be used with a downstream regulator with separate relief safety device in compliance with NFPA 58 requirements.
- Reference Standard UL144 April 11 2014.
- Components resistant to the action of LPG.
- 1/4 NPTh diposnible connection to use pressure gauge or relief valve.
- Adjustable output pressure regulator.
- Manufactured in Zinc with paint coating.
- Does not have a relief valve, this safety fitting must be added at assembly or must always be used with a downstream regulator with separate relief safety device in compliance with NFPA 58 requirements.
- Reference Standard UL144 April 11 2014.
- Components resistant to the action of LPG.
- 1/4 NPTh diposnible connection to use pressure gauge or relief valve.
- Adjustable output pressure regulator.
- High precision and stability.
- Suitable for various gaseous media (NG, LPG, non-corrosive gases).
- Excellent linearity of the error curve, guaranteed even at low flow rates.
- Stable Qmin value.
- Corrosion resistant die-cast aluminum housing.
- Long-term stability due to the use of high quality membranes.
- With pulse sensor housing.
- Stainless steel screws and safety head.
If the product is activated at pressures below its initial discharge setting, it must be replaced (service life approximately 10 years).
They must be installed following the technical parameters of each country.
Use in overpressure protection in LPG or NG gas networks in designs over 500,000 BTU/h to comply with NFPA 58 requirements.
Additional uses Centralines (devices to connect cylinders in parallel in commercial applications).
First stage regulator in two versions:
Adjustable from 10 to 30 psi for high flow rates of 130 m³/h GN or 9'500.000 BTU and fixed pressure at 5 psi for 80 to 150 m³/h GN, with anti-fraud system, which prevents manipulation by third parties, avoiding losses in billing, due to unauthorized comprehensibility factors.
Compact size makes it ideal for small measurement center, saving building space.
Built-in relief valve safety system, which protects networks and equipment from accidental overpressure.
Single stage regulator used in the handling of Natural Gas (NG) for domestic networks.
Manufactured in injected aluminum with electrostatic paint coating.
First stage regulator used in the management of natural gas (NG) for domestic and commercial networks.
Manufactured in injected aluminum with electrostatic paint coating.
Operating temperature: Minimum -10 °C Maximum 65 °C
Safety system: Relief valve. Plastic and rubbers resistant to petroleum derivatives.
Reference Standard NTC 3727 Fifth Update
First stage regulator in two versions:
Adjustable from 10 to 30 psi for high flow rates of 130 m³/h GN or 9'500.000 BTU and fixed pressure at 5 psi for 80 to 150 m³/h GN, with anti-fraud system, which prevents manipulation by third parties, avoiding losses in billing, due to unauthorized comprehensibility factors.
Compact size makes it ideal for small measurement center, saving building space.
Built-in relief valve safety system, which protects networks and equipment from accidental overpressure.
- Range: 0 - 2000 mbar (0 - 29 psi)
- Resolution: 1 mbar (0.01 psi)
- Pressure units: psi,mm Hg,bar,mbar,Kpa, in. w.c.
- Accuracy: ± 0.3 % FS
- Includes USB interface and connector to capture the reading on a PC via software.